Filter
Top Products
2 Installing and Replacing Hardware Parts in Your PC Workstation
Removing, Replacing and Upgrading Memory
30
4 Install your new memory
module, ensuring that
the two notches on the
bottom edge of the
memory module are
aligned with those of the
socket. With the two
retaining clips open,
press the memory
module fully into the socket until the retaining clips click into position
.
5 Replace the PC Workstation’s cover (refer to page 25). Reconnect all the
power and telecommunications cables.
6 Check the HP Summary Screen to verify the new configuration (refer to
“Viewing the HP Summary Screen” on page 17)
.