Filter
Top Products
Figure 18 The Host Group to Port Dialog Box
DescriptionItem
Indicates the number of the selected LDKC.LDKC
Provides information about a host group, where the number groups, from left to right,
indicate:
• First: The Type/Model the type and model number of a host (or a channel extender).
• Second: The Node ID of a host (or a channel extender).
• Third: The Logical Partition Number of the host.
• Fourth: The vendor of the host. Vendors include FJT (Fujitsu), IBM, HTC (Hitachi), and
CNT(Ex). If CNT(Ex) appears, the table row indicates the type, model number, and
node ID of a channel extender.
Host Group
Lists ports that are available and registered.Port table
Closes the dialog box.OK
The LDEV to Security Group Dialog Box
The LDEV to Security Group dialog box (Figure 19) appears when you do either of the following in
the Volume Security window (Figure 4):
• when you right-click a volume from the lower right table and then select LDEV to Security Group
from the pop-up menu.
• when you right-click an item in the tree view and then select List -> LDEV to Security Group from
the pop-up menu. The List -> LDEV to Security Group pop-up command does not display if you
double-click a security group and then right-click a host group or LDEV group from immediately
below the security group.
This dialog box enables you to specify a volume and then displays security groups in which the volume
is registered (see “Locating Security Groups that Contain a Specified Volume” on page 45).
XP24000/XP20000 Volume Security User's Guide 37