Filter
Top Products
2. From the pop-up menu, select List -> LDEV to Security Group.
The LDEV to Security Group dialog box appears (Figure 19). The table on the right displays the
security groups that you want.
If the desired volume is not displayed in the lower-right table:
1. In the tree view of the Volume Security window (Figure 4), right-click an item except for a host
group or LDEV group that appears immediately below a security group.
2. From the pop-up menu, select List -> LDEV to Security Group.
The LDEV to Security Group dialog box appears (Figure 19).
3. Select a CU image number from the CU drop-down list, and then select an LDEV number from
the lower-left table.
The table on the right lists the security groups that you want.
Locating Hosts in a Security Group that Contains a Specified Volume
If a security group is classified as an access group, the security group contains both host and volumes.
The procedures below enable you to specify a volume and to find hosts in the security group in which
the specified volume is registered.
Follow the first procedure if the desired volume is displayed in the lower-right table of the Volume
Security window (Figure 4). Follow the second procedure if the desired volume is not displayed in
the lower-right table.
If the desired volume is displayed in the lower-right table:
1. Right-click the volume in the table.
2. From the pop-up menu, select List -> LDEV to Host.
The LDEV to Host dialog box appears (Figure 20). The table on the right displays a list of hosts.
If the desired volume is not displayed in the lower-right table:
1. In the tree view of the Volume Security window (Figure 4), right-click an item except for a host
group or LDEV group that appears immediately below a security group.
2. From the pop-up menu, select List -> LDEV to Host.
The LDEV to Host dialog box appears (Figure 20).
3. Select a CU image number from the CU drop-down list, and then select an LDEV number from
the lower-left table.
The table on the right lists the security groups that you want.
Locating Security Groups that Contain a Specified Host Group
To specify a host group and then find security groups in which the specified host group is registered,
follow the procedure below:
1. In the tree view of the Volume Security window (Figure 4), right-click an item except for a host
group or LDEV group that appears immediately below a security group.
2. From the pop-up menu, select List -> Host Group to Security Group.
The Host Group to Security Group dialog box appears (Figure 17).
3. From the Host Group drop-down list, select the desired host Group.
The table lists the security groups that you want.
Performing Volume Security Operations46