Filter
Top Products
zt1100/xz100 and xt1000 Series Removing and Replacing Parts 47
Troubleshooting and Self-Repair Guide
5. Lay the keyboard face down on the top case, forward of its normal position, and disconnect the
ribbon cable from the motherboard.
Warning
Do not touch the metal surfaces inside the notebook until they have cooled off. They could
be very hot if the notebook was running recently.
Figure 16. Disconnecting the Keyboard
Reassembly Notes
• Lay the keyboard face down on the top case, forward of its normal position, and reconnect the
ribbon cable.
• Slip the metal tabs on the bottom of the keyboard into their slots in the top case, then lower the
keyboard into place.