Filter
Top Products
50 Removing and Replacing Parts zt1100/xz100 and xt1000 Series
Troubleshooting and Self-Repair Guide
Removing the Speakers
Table 8. Speaker Replacement Part Numbers
Description Part Number Exchange Part Number
Kit, speakers (L/R) F3377-60942
Required Equipment
• #0 Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove these additional assemblies:
• Keyboard cover (page 44).
• Keyboard (page 48).
3. Remove the retaining screw from each speaker. Disconnect the speaker wires from the
motherboard, and lift the speakers out of the notebook.
Figure 20. Removing the Speakers
Reassembly Notes
• Make sure the tabs on the left side (for the left speaker) or the right rear (for the right speaker) of
the speaker fit between the corresponding tabs in the bottom case.
• Make sure the speaker wires fit through their notches in the bottom case, close to the speaker.