HP (Hewlett-Packard) ZE4 Series Laptop User Manual


 
Troubleshooting and Maintenance
Troubleshooting Your Notebook
70 Reference Guide
Heat problems
Your notebook normally gets warm during routine operation.
If the notebook gets abnormally hot
Always set the notebook on a flat surface, so that air can flow freely around and
underneath it.
Make sure the air vents on the bottom and sides of the notebook are clear.
Keep in mind that games and other programs that drive CPU usage toward
100 percent can increase the notebook temperature.
Infrared problems
By default, the infrared port is not enabled, so you must enable it before you can
use it.
If you have problems with infrared communications
Make sure the line between the two infrared ports is not blocked, and that the
ports face each other as squarely as possible. (The notebook infrared port is
located on the front of the notebook.) The ports should be no more than 1 meter
apart.
Check settings in the Device Manager:
1. Select Start > Control Panel > Performance and Maintenance > System.
2. On the Hardware tab, select Device Manager and expand the infrared devices.
Select the infrared port and make sure that the device is enabled.
Make sure only one application is using the infrared port.