Filter
Top Products
HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 1–11
Setting Up and Using Your System
initializing your software
The rx2600 and zx6000 can be configured with the Operating System
(OS) pre-installed or packaged separately.
■ If you purchased a system with the OS pre-installed, the
initialization process starts when you start the workstation for the
first time.
The software initialization process takes a few minutes. You can
change the settings after the software has been initialized.
Ä
CAUTION: Do NOT switch OFF the system while the software is being
initialized — this could cause unexpected results.
The initialization process:
❏ Displays the license agreement.
❏ Asks questions about the system.
■ If you purchased a system and the OS is not pre-installed, install
the OS now:
❏ HP-UX: Follow the instructions on the HP-UX CD envelope.
❏ Linux: Use the HP Enablement Kit for Linux CD and follow
the instructions in its accompanying booklet.
❏ Windows: Windows is always pre-installed on workstation
zx6000s. Use the HP Smart Setup DVD to begin the software
setup process on Integrity rx2600 servers.
turning off your system
To turn off the system:
1. Exit all applications.
2. Execute the Shut Down command provided by your OS.
3. When prompted, press the power button on your system.
NOTE: You can also shut down using the power button on the
system. When you press the power button, the OW shuts down and
the power turns off.