Filter
Top Products
12
Basic operations
To project the picture
1Turn the MAIN POWER switch of the projector on. [
I
: ON]
•The ON indicator will light up orange.
2Press the STANDBY/ON button.
•The ON indicator blinks (green) and then lights (green).
•The ON indicator will blink green during warm-up and light up.
3Turn the lens cover lever down.
•Lens cover opens.
4Adjust the picture size using the ZOOM button.
5Adjust the focus using the FOCUS button.
(1)Press the FOCUS button. The on-screen display shown on the right appears.
(2)Adjust the focus so that the picture is clear using the FOCUS button.
(3)When any other button is pressed, “FOCUS” on the screen will be turned off.
6Power on all connected equipment.
The method of connecting various equipment, see on the page 19 ∼ 27.
7Press the INPUT button or the INPUT SELECT (VIDEO or
RGB) button to select the source of the signal
to be projected on the screen.
•The selected signal input is displayed at the bottom right of the screen.
RGB 1
Example on-screen display
1
7
4
2
5
3
5742
ON
LAMP
TEMP
STANDBY
/ON
INPUT
MUTE
ZOOM
FOCUS
MENU
RESET
+++
FOCUS
+++
STANDBY/ON
MUTE
FOCUS
POSITION ON LASER
RESET RIGHT
ZOOM VOLUME
MENU ON MOUSE ON
TIMER
VIDEO 1/2
INPUT
BLANK
RGB 1/2