Filter
Top Products
14
1
Make sure that the power cord is firmly and
correctly connected to the projector and outlet
2
Turn on the projector's
power
Set the power switch to [ | ] (ON).
The projector will go to STANDBY
mode and the POWER indicator
will light to solid orange.
3
Press the STANDBY/ON button (control
panel or remote control)
• The projector begins warming up and the POWER
indicator blinks green.
• The POWER indicator stops blinking
and lights to solid green once the
projector's power is completely on.
4
Open the slide lens door
The picture is projected.
STANDBY/ON INPUT KEYSTONE RESET
LANP
TENP
POWER
KE
YSTONE
RESET
LANP
TENP
POWER
POWER indicator
STANDBY/ON