Filter
Top Products
27
3. Management with Web browser software
3.1 Confi guring and controlling the projector via a web browser (continued)
3.1.10 Projector Control
Controls the projector.
Item Description
Main
Power Turns the power on/off.
Input Source Selects the input source.
Picture Mode Selects the picture mode setting.
Blank On/Off Turns Blank on/off.
Freeze Turns Freeze on/off.
Magnify
Controls the magnify setting.
In some input signal sources, it might stop “Magnify” even
though it does not reach to maximum setting value.
Template Turns template on/off.
Shutter Open / close the shutter.
Zoom Adjusts the zoom setting.
Focus Adjusts the focus setting.
Lens Shift V Adjusts the vertical lens shift.
Lens Shift H Adjusts the horizontal lens shift.
Lens Memory Saves / Loads the Lens Memory data.
P by P Turns the P by P on / off.
P by P Left Source Selects the P by P Left Source setting.
P by P Right Source Selects the P by P Right Source setting.
P by P Main Area Selects the P by P Main Area Source setting.
MY Image Select MY IMAGE data.
MY Image Delete Delete MY IMAGE data.
Picture
Brightness Adjusts the brightness setting.
Contrast Adjusts the contrast setting.
The items shown in the table below can be
performed using the Projector Control menu.
Select an item using the up and down arrow keys
on the PC.
Most of the items have a submenu. Refer to the
table below for details.
• The setting value may not match with the actual value if the user
changes the value manually. In that case, please refresh the page by clicking
[Refresh] button.
NOTE