Filter
Top Products
7K200 SATA OEM Specification
149/173
4
The self-test routine completed with unknown element failure
5
The self-test routine completed with electrical element failure
6
The self-test routine completed with servo element failure
7
The self-test routine completed with read element failure
15
The self-test routine in progress
14.39.2.5 Total Time in Seconds to Complete Off-line Data
Collection Activity
This field tells the host how many seconds the device requires to complete the off-line data collection
activity.
14.39.2.6 Current Segment Pointer
This byte is a counter indicating the next segment to execute as an off-line data collection activity.
Because the number of segments is 1, 01h is always returned in this field.
14.39.2.7 Off-Line Data Collection Capability
Bit Definition
0
Execute Off-line Immediate implemented bit
0
S.M.A.R.T. Execute Off-line Immediate subcommand is not implemented
1
S.M.A.R.T. Execute Off-line Immediate subcommand is implemented
1
Enable/disable Automatic Off-line implemented bit
0
S.M.A.R.T. Enable/disable Automatic Off-line subcommand is not implemented
1
S.M.A.R.T. Enable/disable Automatic Off-line subcommand is implemented
2
abort/restart off-line by host bit
0
The device will suspend off-line data collection activity after an interrupting command and resume
it after some vendor specific event
1
The device will abort off-line data collection activity upon receipt of a new command
3
Off-line Read Scanning implemented bit
0
The device does not support Off-line Read Scanning
1
The device supports Off-line Read Scanning
4
Self-test implemented bit
0
Self-test routine is not implemented
1
Self-test routine is implemented
5
Reserved (0)
6
Selective self-test implemented bit
0
Selective self-test routine is not implemented
1
Selective self-test routine is implemented
7
Reserved (0)
14.39.2.8 S.M.A.R.T. Capability
This word of bit flags describes the S.M.A.R.T. capabilities of the device. The device will return 03h
indicating that the device will save its Attribute Values prior to going into a power saving mode and
supports the S.M.A.R.T. ENABLE/DISABLE ATTRIBUTE AUTOSAVE command.
Bit Definition
0
Pre-power mode attribute saving capability
If bit = 1, the device will save its Attribute Values prior to going into a power saving
mode (Standby or Sleep mode).
1
Attribute autosave capability
If bit = 1, the device supports the S.M.A.R.T. ENABLE/DISABLE ATTRIBUTE AUTOSAVE
command.
2-15
Reserved (0)
14.39.2.9 Error Logging Capability
Bit Definition
7-1
Reserved (0)