Honeywell 7180 All in One Printer User Manual


 
SCANNER OPERATION
Primary and Secondary Scan Pattern Modes
There are two scan pattern modes available with the 7180.
The primary scan pattern mode is the default scan pattern active when the
scanner starts.
The secondary scan pattern mode is activated by pressing the button
located on the top of the scanner. This mode is also referred to as the
button mode. For additional information on OrbitCGs button modes and an
example of each, please refer to Button Functions below.
The scanner returns to the primary (omni) scan pattern mode after a
double click of the button or if the unit has not scanned a bar code for
the duration of a pre-configured time limit.
Button Functions
The button on the top of the 7180 can be configured to function in one of
two modes.
Button Click Mode, with CodeGate Enabled (Default)
Button Click Mode, with CodeGate Disabled
The following pages include examples of how the button will function when the
unit has been configured to operate in each of the four button modes.
14