Honeywell 7800 Tablet User Manual


 
7 - 11
4. If necessary, edit the Server settings (i.e., Domain\Username, Password, Server) shown on the
screen.
5. Check the appropriate security settings for the account type (i.e., Use secure connection (SSL)
and/or Accept all SSL certificates).
6. Tap Next.
Note: A “Checking incoming server settings. . .” message appears on the screen as communication is
established with the server.
7. Modify your account preferences, then tap Next..
8. Enter a name (optional) for the account, then tap Done.
9. The new account appears under the Manage accounts heading on the Accounts & sync settings
screen.
Privacy
The Privacy screen provide access to perform a Factory data reset to remove personal data from the
terminal. A Factory data reset erases all data from the terminal’s internal storage, including: Google
account information, system data and settings, application data and settings, and downloaded applica-
tions.
To also clear music, pictures and other user data, the SD card needs to be erased. See Storage below.
Storage
The storage settings screen provides storage statistics for the microSD card and the internal storage of
the terminal. The screen also allows the user to unmount the microSD card in preparation for safe
removal from the terminal or the ability to erase all data from the microSD card.
Note: Honeywell recommends unmounting the microSD card to prevent possible data corruption or damage to the
card during replacement. Never attempt to replace the microSD card unless you have placed the terminal in
Suspend mode.
Unmount/Mount the micorSD card
To unmount the microSD card for safe removal:
1. Tap Launcher > Settings > Storage.
2. Tap Unmount SD card. A pop-window notifies you the SD card will be unmounted.
3. Press the Power key to put the terminal in Suspend mode.
4. Replace the microSD card. See Installing a SIM Card and/or Replacing the Memory Card on page
3-15.
5. After you replace the microSD card and reboot the terminal, pull down the notification panel and tap
the "SD card safe to remove" notification to mount the microSD.