Filter
Top Products
154 •
Industrial Safety Products
•
FF-SE
FF-SE Series
Infrared beam radius At 6 m / 19.7 ft: 100 mm / 3.9 in • At 10 m / 32.8 ft: 170 mm / 6.7 in
Beam Increment 0,5°
Response time t1 280 ms (including relays)
Device weight 3 kg / 6.61 lbs
Berufsgenossenschaftliches
Institut für
Arbeitssicherheit
BIA
FF-SE
• Objects and people protection
• Scanning angle up to 300°
• Surveillance up to 262 m
2
/ 2820 ft
2
Dimensions in millimeters / inches, meters / feet, weights in kg / lbs
Features Power supply 24 Vdc, ± 15%
Consumption 0,75 A at 24 Vdc, rush at startup: 2 A during 100 ms
Measure and detection angle 300°
Detection distance Black target (1,8%): 6 m /19.7 ft
Outputs 3 relay outputs, free of potential: 2 A / 48 V
Head spinning frequency 8 Hz, ± 5%
Status display
Green:
safety zone free •
Red
: safety zone occupied •
Yellow:
alarm zone occupied - Diagnostic
Emitting source Infrared laser LED, 905 nm, ± 30 nm
Beam divergence 0,9°
Interface RS 232, V.24, 19200 Baud
Safety class
Sensor:
Type 3 according to IEC/EN 61496-1
(1)
•
Laser
: Class 1
(2)
according to IEC 825-1
Protection class IP 65 (NEMA 4, 13)
Operating temperature 0 °C to 50 °C / 32 °F to 122 °F
Storage temperature -20 °C to 70 °C / -4 °F to 158 °F
Shock and vibration resistance According to IEC 68
Material
Casing
: Aluminium •
Connector
: Steel
Colour Yellow paint RAL 1021
Ordering information
FF-SEDGE6G2-1 Sensor kit
(Sensor + power cable)
and
FF-SEZ6SOFT2 Software kit (Diskette + PC cable)
Accessories:
FF-SEZ6BRAC3 Mounting bracket
FF-SEZ6PLAT Mounting plate
FF-SEZ6POST Post supporting the bracket
Remarks
(1) Category 3 per EN 954-1.
(2) No special limitation of use in the USA or in
Europe.
(Pending)
Interface
24 Vdc
3.15 A
Signal Fuse
112 / 4.41 in
54 / 2.13 in
112 / 4.41 in
10 / 0.39 in
172 / 6.77 in
10,5 / 0.41 in
M4 x 10 (4x)
172 / 6.77 in
approx. 60 / 2.36 in
==
Type 132,5 ± 1 / 5.22 in
175,5 ± 1 / 6.91 in
155,5 ± 1 / 6.13 in
ø 4,5 / 0.17
± 0,2
86 ± 0,2 / 3.39 in
144 ± 0,2 / 5.67 in
13,5 /
0.53 in
Type plate
Optical axis
View from the bottom
Position of the mounting holes
Protection cap
interface
Binder
Binder
PE connection
Green
SAFETY
Red
SAFETY
Yellow
ALARM
Yellow
DIAGNOSTIC
LED
Mounting holes
Type 3
per IEC/EN 61496-1
Approved as