Filter
Top Products
158 •
Industrial Safety Products
•
FF-SE
FF-SE Series
Accessories
• FF-SEZ6BRAC3 Mounting bracket: It reinforces the
protection in installations where the sensor could be reached
by humans or vehicles. It allows head up or down mounting.
The bracket can be mounted on a vertical surface from behind
thanks to 4 M6 holes. There are 2 adjustable screws that allow
an adjustment of the scanning plane (±8°) in X, ± 4° in Y, so as
to allow an accurate placement of the beam, especially in
multiple device configurations.
• FF-SEZ6PLAT Mounting plate: Mounting plate to mount the
scanner on horizontal ground.
• FF-SEZ6POST:
This post is designed to support the mounting bracket
FF-SEZ6BRAC3. This allows an adjustment of the scanning
plane height. The scanning plane can be adjusted from
300 mm up to 700 mm / 11.82 in to 27.58 in. The bracket can
also be rotated around the post. A collar holds the bracket to
the post and slides on the post. The bracket can be mounted
up or down, so that the laser scanner head is either up or
down.
• FF-SEZ6SOFT2: The Honeywell software kit allows sensor
programming and setup. It is supplied with a manual
explaining how to use it and an RS232 cable for PC
connection.
226 / 8.90
130 / 5.12
overall: 700 / 27.58
300 / 11.82
ø295 /11.62
Dimensions in millimeter/inches
±8˚ ±4˚
135 / 5.32
4 ø6 holes
4 M12 holes
200 / 7.88
165 / 6.50
50 /
1.97
89,5 /
3.52
60 /
116
13 /
0.51
89,5 / 3.52
200 / 7.88
110,5 / 4.35
4xr = 10
r=10
2xr=11
1 ø6 hole
2 ø9 holes
2xr=10
95 / 3.74
95 /
3.74
30 /
1.18
105 /
4.13
125 / 4.92
42 /
1.65
42 /
1.65
90 /
3.54
4 ø6 holes for wall mounting
30 /
1.18
86 / 3.38
5 /
0.19
mini. r
230 / 9.06
110 / 4.33
1 ø 6 hole
28/
1.10
60 /
2.36
60 /
2.36