Filter
Top Products
34
Wake Activation Area Sensitivity (Photocell LED Output Range)
Changing the Wake Area Sensitivity Level (Photocell LED Range Adjust)
The MS2400 Series bar code scanner wake area sensitivity level can be set to the end users preference by
scanning one of the Photocell Sensitivity adjustment bar codes below.
³ 2 2 1 2 0 0
³ 2 2 1 2 1 0
³ 2 2 1 2 2 0
³ 2 2 1 2 3 0
* MS2400 Series Bar Code Scanner Default Setting
This feature enables the MS24xx to
be at Max sensitivity or far sensing
for the wake up photo transistor.
* This is the default setting.
This feature enables the MS24xx to
be at a medium 1 sensitivity or
medium sensing for the wake up
photo transistor.
This feature enables the MS24xx to
be at a low sensitivity or low sensing
for the wake up photo transistor.
This feature enables the MS24xx to
be at the lowest sensitivity (close
only) for the wake up photo
transistor.
Low Photocell
Sensitivity
Medium Photocell
Sensitivity
*Max Photocell
Sensitivity
Minimum Photocell
Sensitivity