Honeywell MS9500 Scanner User Manual


 
1
INTRODUCTION
Product Overview
Honeywell’s MS9500 Voyagerseries of hand-held (single-line) laser scanners
offers the user an aggressive solution for scanning all standard 1D bar codes
including GS1 DataBar™ (RSS) bar codes. The MS9500 series is equipped with
both in-stand and out-of-stand operation enabling hand-held or fixed projection
scanning. The MS9520 Voyager model includes all of the same features as the
MS9540 VoyagerCGmodel, with the exception of Honeywell’s patented
CodeGatetechnology.
The MS9540, VoyagerCG incorporates Honeywell’s patented auto-trigger and
CodeGate button feature. When a bar code is place in the scanner’s IR range,
the auto-trigger activates the laser enabling the user to align the visible laser line
over the bar code selected for scanning. The user can then press the CodeGate
button, to transmit the data to the host system. When the MS9540 is placed in
the stand the CodeGate button feature will automatically deactivating for hands
free operation.
Some additional key product features for the MS9500 series include:
Auto-trigger operation and auto-stand detect
CodeGate data transmission technology (MS9540 only)
Flash – upgradeable firmware
Easy configuration with MetroSelectbar codes and MetroSet™2
Windows
®
Support for common interfaces including USB (see chart below)
compatible software
VOYAGER VOYAGERCG INTERFACE
MS9520 00 MS9540 00 Laser Emulation RS232 Transmit/Receive
MS9520 11 MS9540 11
RS485
MS9520 14
, RS232 (TXD, RXD, RTS, CTS)
MS9540 14 RS232 (TXD, RXD, RTS, CTS, DTR, DSR)
MS9520 38 MS9540 38
Low Speed USB*, TTL RS232 (TXD, RXD, RTS,
CTS)
MS9520 40 MS9540 40 Full Speed USB, RS232 (TXD, RXD, RTS, CTS)
MS9520 41 MS9540 41 RS232/Light Pen Emulation
MS9520 47 MS9540 47
Keyboard Wedge, Stand-Alone Keyboard and TTL
RS232 Transmit/Receive
* Configurable for Keyboard Emulation Mode or Serial Emulation Mode. The default
setting is Keyboard Emulation Mode.
Applicable for IBM
®
host applications.