Filter
Top Products
Introduction PRO22R1-Reader Interface
iv
CAUTION
IF ANY DAMAGE TO THE SHIPMENT IS NOTICED, A CLAIM
MUST BE FILED WITH THE COMMERCIAL CARRIER
RESPONSIBLE.
CAUTION
Electro-static discharge can damage CMOS integrated circuits
and modules.
To prevent damage always follow these procedures:
Use static shield packaging and containers to transport all
electronic components, including completed reader assemblies.
Handle all ESD sensitive components at an approved static
controlled workstation. These workstations consist of a desk
mat, floor mat and an ESD wrist strap. Workstations are
available from various vendors.
NOTICE
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the
FCC Rules when wired using metal conduit for the cabling
external to the enclosure. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference that will require
correcting at the users expense.
NOTICE
This document and the data in it shall not be duplicated, used
or disclosed to others for procurement or manufacture, except
as authorized by and with the written permission of,
Engineered Systems. The information contained in this
document or in the product itself is considered the exclusive
property and trade secrets of Engineered Systems. Copyright
laws of the United States protect all information in this
document, and in the software product itself.
NOTICE
Any use of this product is subject to the terms and acceptance
of the Engineered Systems Software Agreement. Please
request a copy from Engineered Systems, and review the
agreement carefully.