Filter
Top Products
BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
32 EN1B-0198GE51 R0801
Text Text written with this font shows
terminal output.
Note: All BNA Bootloader commands are case-
sensitive!
6.5.1 Help or ?
Entering help or ? at the BNA bootloader>
prompt followed by <Enter> displays all available
BNA Bootloader commands.
In each sub-shell help or ? can also be used to view
the existing commands.
All command lists can vary between different users.
The lists don’t show any commands which a user is
not allowed to execute.
6.5.2 np - Basic network parameters
The basic network parameters command np is used
to define the IP address, the network mask, and the
default gateway of the BNA device. This
information is normally provided by the local IS
department.
np is not a direct command; instead, it provides a
sub-shell with the following commands:
display displays current basic network settings.
modify changes basic network settings. After
entering this command each basic
network parameter will be queried