Filter
Top Products
BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
EN1B-0198GE51 R0801 37
6.5.5 ping - ping
Sends an ICMP Ping through TCP/IP to the FTP-
Server defined in the download configuration or to
the machine addressed by the IP-Address in the
optional command-line parameter.
This command can be used to check whether the
network connection is working properly.
6.5.6 ver - Show installed software
The command ver outputs a list of all installed
software components on the current BNA device.
6.5.7 run - Execute installed software
The command run starts a previously-installed
application firmware.
If no application firmware could be found, then the
information No executable found is printed
out. In this case, use load to download an
application firmware.
6.5.8 um - User management
The user management command um allows the
definition of users, different access rights per user
and user individual password settings.
User definitions are necessary to provide a secure
device on an open TCP/IP network. Furthermore it