Filter
Top Products
19
19
default zone is a Pacific Standard Time (PST). (Refer to a MANUAL
SETTINGS section)
TEMPERATURE AND ALARM WINDOW
The Temperature and Alarm Window displays an indoor temperature
and two time alarms. Press the MODE button to select among indoor
temperature, Alarm 1 and Alarm 2. Press the ℃/℉ button to change the
temperature unit between degree Celsius and degree Fahrenheit. (The
default display is in degree Fahrenheit.)
TIME AND CALENDAR WINDOWS
The Atomic Clock displays time in an hour-minutes-seconds format in
the Time Window located below the Temperature and Alarm Window.
The date is displayed in month-date format next to the day of the week
and moon phase icon in the Calendar Window.
MANUAL SETTINGS
If desired, the time, date and other available parameters can be
programmed manually. It is necessary to set your Time Zone manually.
TIME ZONE
• Enter the US Time Zone programming mode by pressing and
holding the UP button for 3 seconds.
• Keep holding UP button until the desired time zone (Pacific,
Mountain, Central or Eastern) is highlighted on the unit’s display
map in the Time Window
• Release the UP button and the desired Time Zone will be
selected
20
CLOCK
• Press and hold MODE button for 3 seconds until the year digits
in the Calendar Window will flash
• Press UP or DOWN adjusting a correct year
• Press MODE to confirm and move to the next parameter – the
month digit will flash
• Press UP or DOWN adjusting the current month and then press
MODE to confirm – the date digit will flash
• Press UP or DOWN adjusting the date and then press MODE to
confirm – the “M” and “D” digits will flash
• Press UP of DOWN selecting the calendar display format in M/ D
or D/ M - the hour digit will flash in the Time Window
• Press UP or DOWN adjusting the hour and then press MODE to
confirm – the minutes will flash
• Press UP or DOWN adjusting the minutes and then press MODE
for the last time to confirm after the last parameter is set
DAY OF THE WEEK LANGUAGE
• Press and hold LANG button for 3 seconds to enter into the day
of the week language programming mode: the default language
abbreviation will appear (example – EN)
• Continue holding LANG button until the desired day of the week
language abbreviation is displayed
• Release the LANG button and the day of the week will be
displayed in selected language