Filter
Top Products
5 - 24
AC/DC
Select the AC/DC power scheme/plan when manual control of the Thor VM2 power on process is desired.
This is the default power scheme/plan. In AC/DC mode the Thor VM2 is turned on by a press of the Power button.
Ignition input is ignored when AC/DC Mode is enabled.
The following default timeouts are used in the AC/DC power scheme/plan.
Note: By default Sleep is disabled and Hibernate is enabled. Because the Thor VM2 with Windows Embedded
Standard 7 or Windows 7 Professional cannot transition from Sleep to Hibernate due to a limitation of the
operating system, Sleep is disabled. Power savings are significantly greater using Hibernate.
Windows Embedded Standard 2009
Setting
Plugged In
(AC or DC Power)
Running on Batteries
(UPS Power)
Turn off monitor 30 minutes 1 minute
Turn of hard disks 30 minutes 1 minute
System standby 5 hours 10 minutes
System hibernate Never 20 minutes
Windows Embedded Standard 7, Windows 7 Professional
Setting
Plugged In
(AC or DC Power)
On Battery
(UPS Power)
Dim the display Never Never
Turn of the display 30 minutes 1 minute
Put the computer to sleep Never (see note) Never (see note)
Hibernate after 300 minutes 20 minutes