Filter
Top Products
5 - 25
AC/DC Behavior
When the AC/DC power scheme/plan is selected and external power is present the Thor VM2 behaves as
described below. If external power is not present, refer to the UPS (page 5-32) section for Thor VM2 behavior.
Thor VM2 is Off
Conditions
The Thor VM2 is Off and external power is available, such as:
• Thor VM2 is installed on a powered Quick Mount Smart Dock with the dock power switch On
• Thor VM2 is already mounted to a dock and external power is applied to the dock
Result
The Thor VM2 boots when the Power button is pressed. Once booted the Thor VM2 follows the AC/DC
power scheme/plan with timers reset after bootup.
Thor VM2 is On
Conditions
The Thor VM2 is On (but powered by the UPS battery) and gets external power, such as:
• Thor VM2 is installed on a powered dock with the dock power switch On
• Thor VM2 is already mounted to a dock with the dock power switch On and truck power is applied to
the dock
• Thor VM2 is already mounted to a dock and the dock power switch is turned On
Result
The Thor VM2 continues to run and follows the AC/DC power scheme/plan with timers reset at power
connection.