Filter
Top Products
0702 13
FA 500.2
Declaration of Conformity
Machinery directive 98 / 37 / EG
EMC directive 89 / 336 / EWG
Low voltage directive 73 / 23 / EWG
The manufacturer HSM GmbH + Co. KG, Bahnhofstrasse 115, D-88682 Salem declares herewith, that the paper shredder (Solo
machine) HSM FA 500.2 corresponds with the above mentioned EC Machine Directive including all relevant modifi cations.
Applied standards and technical specifi cations:
• EN 60204-1:1997-12 • EN ISO 12100-1:2003-11
• EN ISO 12100-2:2003-11 • EN 294:1992-06
• EN 55014-1:200-10 + A1:2001-10 + A2:2002-10 • EN 55014-2:1997-02 + A1:2001-12
• EN 61000-3-2:2000-12 • EN 61000-3-3:1995-01 + A1:2001-06
Caution:
It is prohibited to operate only one machine of a combination-version machine. Only the combination of document
shredder and HSM baling press fulfi ls the requirements of EN 294.
Salem, 01.12.2004
Rolf Gasteier - Technical Director
Machine type inspection for compliance with the requirements of the EC Machine Directive was carried out by the „Administration“/
Inspection Authority Committee of Experts, Subject Area „Offi ce Machines and Devices“, on the premises of the Verwaltungs-
Berufsgenossenschaft, Deelbögenkamp 4, D-22297 Hamburg. This inspection authority is the authority responsible in accordance
with Annex V of the EC Machine Directive.
11. Technical Data
Cutting type Cross cut
Cut size (mm) 10.5 x 40 - 76 7.5 x 40 - 80 6 x 40 - 53
Safety level DIN 32757 – 1 2 2 3
Cutting capacity (sheets), DIN A4, 70 g/m
2
80 g/m
2
600 - 650
510 - 550
500 - 550
425 - 470
400 - 450
340 - 350
Cutting speed 210 mm/s
Effective width 500 mm
Weight approx. 725 kg
Voltage 3 x 400 V, 50 Hz
Rated power 9.2 kW
Rated current 18.1 A
Fuse rate 32 A
Plug CEE 32A
Sound level (idling / under load) 63 dB(A) / 80 dB(A)