Huawei WS320 Network Router User Manual


 
Step 7
Place the P
C in Room C. After being started, the PC automatically
connects to the wireless network extended by the WS320. At this moment,
the extended network can be used the same as that implemented in Room
A.
On the wireless router, when the security mode of the wireless
network is set to Open and the encryption mode is set to WEP, if you
enter a wrong WEP password, the WS320 can connect to the wireless
network but cannot normally communicate with the wireless router.
The PC cannot obtain an IP address which is allocated by the wireless
router. For a solution, press the reset button on the panel of the WS320
to restore the WS320 to the default settings. Then try to configure the
WS320 again. This problem is caused by the defect of the wireless
network protocol. To ensure normal communication, you must enter
the correct WEP password.
24