Filter
Top Products
Hubbell Industrial Controls, Inc.
LXi Fire Pump Controllers
For use with Electric Motor
Driven Fire Pumps – Microprocessor Type
Brochure 6300M
• May 2004 • Replaces August 2002
6300M
Hubbell Fire pump Motor Control-
lers are designed to comply with
the latest standard of the National
Fire Protection Association for the
installation of stationary pumps for
fire protection (NFPA-20).
Models
The following combination
controllers are available:
♦ Model LXi-1100 - Solid State
Soft Start/Stop combined Man-
ual and Automatic controllers
are designed to control squirrel
cage motors where the power
source does not permit full volt-
age starting and to reduce me-
chanical and hydraulic stress on
plumbing.
♦ Model LXi-1200 - Across-the-
Line combined Manual and
Automatic Controllers are de-
signed to control squirrel cage
motors by means of Across-the-
Line starting.
♦ Model LXi-1300 - Autotrans-
former combined Manual and
Automatic Controllers are de-
signed to control squirrel cage
motors where the power source
does not permit full voltage
starting.
♦ Model LXi-1400 - Reduced
Voltage Primary Resistor Start
combined Manual and Auto-
matic Controllers are designed
to control squirrel cage motors
by means of Primary Resistor
starting.
♦ Model LXi-1600 - Wound Rotor
Manual Controllers are designed
to control wound rotor motors
driving multi-stage fire pumps.
They are available with five
speed points (standard) through
nine speed points (optional).
NYC MEA Approved.
♦ Model LXi-1700 - Part Winding
combined Manual and Auto-
matic Controllers are designed
to control squirrel cage motors
by means of Part Winding
Starting.
♦ Model LXi-1800 - (Closed) &
LXi-1900 (Open) Transition -
Wye/Delta combined Manual
and Automatic Controllers with
ATS are designed to control
squirrel cage motors by means
of Wye/Delta Starting either
Open or Closed Transition.
Features
♦ LXi Microprocessor Logic &
Control
♦ Coordinated design engineered,
built, tested and labeled by one
manufacturer
♦ Suitable for use as service en-
trance equipment
♦ Full compliment of visual indi-
cators
♦ Communications port
♦ LCD display shows system
pressure, and simultaneous
reading of all phases for amps
and volts
♦ Full range of horsepower ratings
and voltages
♦ Ample cable bending space
♦ Printer Available
♦ Digital Pressure Recording
♦ New Small Cabinet Design
Saves Pump Room Space
Examples:
40h x 22w x 13 deep for maximum of
40wp @ 208v-230V, 75hp @ 480v
LXi-1200 Shown
New Small Cabinet Design For Some Models