Filter
Top Products
7. Pivot the card until you can snap it into place by pressing the upper side
of the connectors as shown.
Make sure that the card is firmly fixed in the slot and does not move
easily.
8. Align the tabs of the Mini-PCI Card slot cover with the corresponding
slots; then press the cover flat.
9. Tighten the screw of the cover.
Attention: After you install a Mini-PCI Card, do not use your computer
until you have closed the cover. Never use the computer with the cover
open.
10. Reinstall the battery. (For information on reinstalling the battery, refer to
the ThinkPad R32 Series Service and Troubleshooting Guide.)
11. Turn the computer over again. Connect the ac adapter and cables to the
computer; then turn it on.
For ThinkPad X30 Series computer
If you are using ThinkPad X30 Series computer, do as follows:
1. Turn off the computer. Then disconnect the ac adapter and all cables from
the computer.
2. Remove the battery and the keyboard. (For information on removing the
battery and the keyboard, refer to the ThinkPad X30 Series Service and
Troubleshooting Guide.)
1-4 IBM High Rate Wireless LAN Mini-PCI Adapter: User’s Guide