Filter
Top Products
Family 2785+01 IBM Infoprint 2085
A 10 GB hard drive comes standard with both printers. IPDS Single Byte Character Set (SBCS) and Double Byte Character Set
(DBCS) fonts come stored on the hard drive. With the PCL/PostScript feature installed, SBCS fonts including SEMEA (Southern
Europe, Middle East, Africa) PCL fonts are available on the hard drive.
Downloaded fonts and macros may be individually deleted from the hard drive. PCL 6 fonts and PCL 6 macros can be downloaded and
stored using the IBM Departmental Printer Resource Utility (DPRU).
IBM AFP/IPDS
Infoprint 2085 and 2105 come standard with IBM's AFP/IPDS.
PCL/PostScript
Infoprint 2085 and 2105 support PCL and Adobe PostScript with the optional PCL/PostScript features. Included in these features are:
● PCL 5e resident fonts - 47 fonts
● PCL 6 resident fonts - 47 fonts
● Adobe PostScript 3 resident fonts - 136 fonts total
The PCL/PostScript feature (feature numbers 4820/4821) includes Single Byte Character Set (SBCS) support. It also comes with a CD-
ROM that includes a setup wizard, PCL/PostScript drivers, port monitors, MIBs, and DPRU. The feature is tied to a specific machine is
are not interchangeable with other Infoprint 2085 and 2105 machines.
The PostScript Japanese feature (feature numbers 4810/4811) include Double Byte Character Set (DBCS) support with Morisawa fonts
(GothicBBB-Medium and Ryumin-Light). This feature should only be ordered if double byte support is required. The PCL/PostScript
feature (feature number 4820/4821) is a pre-requisite for this feature. The Japanese PCL/PostScript feature is tied to a specific
machine and is not interchangeable with other Infoprint 2085 and 2105 machines.
Token-Ring
Infoprint 2085 and 2105 support an optional Token-Ring 4/16 adapter in addition to the standard Ethernet attachment. However, only
one attachment, Ethernet or Token-Ring, can be active at a time.
Control Panel
Infoprint 2085 and 2105 have a full-color 9-inch LCD (D-STN), 640 x 480 dot control panel. It consists of an LCD touch-screen, hard
keys, and colored LEDs for status.
Two languages can be loaded into the control panel and the operator may select between the two. If Japanese language is loaded,
then only one language can be loaded.
Paper Handling
Infoprint 2085 and 2105 come with 3,000-sheet input capacity standard. This capability includes three input drawers. An optional 4,550-
sheet High Capacity Feeder with three drawers is available, which increases the maximum input capacity to 7,550 sheets. Duplex
capability comes standard with both printers.
Custom paper sizes are supported in trays 2 and 3. Custom size is 148 mm x 210 mm (SEF) minimum (5.9 in. x 8.3 in.) and 297 mm x
432 mm (SEF) maximum (11.8 in. x 17 in.). Custom paper sizes run at half speed and are supported in PostScript, IPDS, and PCL 6,
but not PCL 5.
Infoprint 2085 and 2105 print the front side of duplex pages first. This means preprinted forms that will be used for both simplex and
duplex jobs can be loaded in a single tray and used effectively with no extra steps required.
A finisher with stitching capabilities comes standard with both printers. It has a proof bin with 500-sheet capacity (A4/Letter) and a shift
bin with 3,000-sheet capacity (A4/Letter). Single page jobs cannot be shifted (offset) and jobs cannot be stapled and shifted. If a job
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (3 of 47)5/25/2005 7:01:07 AM