Filter
Top Products
Family 2785+01 IBM Infoprint 2085
requires both of these, it will be stapled only.
Optional hole-punching kits are available. See Paper Handling Options section for a description of the punch kits. Only one punch kit
may be installed at a time and it requires a CE to install or change the kits. Punch jobs can go to the shift tray or proof tray.
Paper Handling Options
● 4,550-Sheet High Capacity Feeder (feature numbers 4520/4521)
This feature has three trays for 4,550-sheet capacity. Trays 4 and 5 have 1,000-sheet capacity each and tray 6 has 2,550-sheet
capacity.
● A3/11" x 17" Tray Kit (feature numbers 4500/4501)
This option supports large size media including A3/11 x 17 in. media. It replaces the standard tray 1 (tandem tray) which cannot
be used again without a CE involvement. This tray is supported in tray 1 only and has a capacity of 1,000 sheets. Media
supported in this tray include A3 SEF, B4 SEF, A4 SEF, A4 LEF, 11" x 17" SEF, Letter SEF, Letter LEF, and Legal SEF.
● 2-Hole Punch Kit for Finisher (feature numbers 4620/4621)
This option supports 2-hole punching in the European and Japan format.
● 2-Hole Punch Kit for Finisher (feature numbers 4622/4623)
This option supports 2-hole punching in the U.S. format.
● 3-Hole Punch Kit for Finisher (feature numbers 4624/4625)
This option supports 3-hole punching.
● 4-Hole Punch Kit for Finisher (feature numbers 4626/4627)
This option supports 4-hole punching.
● 4-Hole Swedish Style Punch Kit for Finisher (feature numbers 4628/4629)
This option supports Swedish style 4-hole punching.
Print Quality
Infoprint 2085 and 2105 offer high-quality print resolution of 600 x 600 dpi. Both printers support up to 256 levels of gray for IOCA
images.
There are three print modes; Refine, Normal, and Econo. Refine mode is the default and offers the best overall print quality. Normal
mode is slightly darker than Refine mode and Econo mode is slightly lighter with reduced toner usage.
For AFP/IPDS, resolutions of 240, 600, or AUTO, the print mode must be set to enhanced print mode. Enhanced print mode produces
the optimal print quality; however, complex jobs may print slower. Standard print mode is available for optimal performance of complex
print jobs.
Print Area
Both printers support a printable area of within 4 mm of the edge on all sides for IPDS and PCL/PostScript data streams. Edge-to-edge
mode allows printing to within 2 mm leading edge and 0 mm on all other edges of the media.
Maximum Monthly Usage
The maximum monthly usage for both Infoprint 2085 and 2105 is 800,000 impressions. IBM does not recommend printing to this
monthly maximum on a consistent basis.
Average Monthly Usage
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (4 of 47)5/25/2005 7:01:07 AM