Filter
Top Products
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Depending on the model, your server might look slightly different from the illustrations in this topic.
To reinstall the server cover and reconnect cables to your server, do the following:
1. Make sure that all components have been reassembled correctly and that no tools or loose screws are
left inside your server.
2. Make sure that all internal cables are routed correctly and secured by any cable clips or ties in the
server. Keep cables clear of the hinges and sides of the server chassis to avoid interference with
reinstalling the server cover.
3. If you have removed the front bezel, reinstall it. See “Removing and reinstalling the front bezel” on
page 87.
4. Position the server cover on the chassis so that the rail on the bottom of the server cover engages the
bottom rail on the chassis. Then, align the four tabs 1 on the server cover with the corresponding holes
in the top edge of the chassis. Pivot the server cover to close it.
Figure 99. Closing the server cover
Chapter 6. Installing, removing, or replacing hardware 163