Filter
Top Products
Parameter Description Values
snode Identifies the name of the secondary node.
Setting this value overrides the snode value in
the Process statement. The snode parameter is
required either on the submit command or
Process statement.
name | host name | nnn.nnn.nnn.nnn or
nnnn:nnnn:nnnn:nnnn:nnnn:nnnn:nnnn:nnnn[;port
name | nnnnn]]
name—Specifies the node name of the remote
node. The secondary node name corresponds to
an entry in the network map file.
host name—Specifies the name of the host
computer where the remote Sterling
Connect:Direct node is running.
nnn.nnn.nnn.nnn or
nnnn:nnnn:nnnn:nnnn:nnnn:nnnn:nnnn:nnnn
—Specifies the IP address of the remote node in
IPv4 or IPv6 format: nnn.nnn.nnn.nnn (IPv4) or
nnnn:nnnn:nnnn:nnnn:nnnn:nnnn:nnnn:nnnn
(IPv6).
[;port number |nnnnn]—Identifies the
communications port. You can only use this
parameter with the host name or IP address
parameters. The nnnnn value is a decimal number
from 1,024–65,535.
Chapter 1. Controlling and Monitoring Processes 9