Filter
Top Products
Parameter Description Value
snode Locate the statistics file
record by the secondary
node name. This
parameter can be used to
specify a specific remote
node, a generic value for
matching remote node
names (using pattern
matching), or a list of
multiple remote node
names.
The secondary node name
typically contains the
1–16 character remote
Sterling Connect:Direct
node name, but can be
any string up to 256
alphanumeric characters
long. You can also specify
a remote node name as
an IP address or
hostname and a port
number.
remote node specification | generic |(list)
remote node specification—Identifies a specific
remote node name.
generic—Specifies a nonspecific value for the
remote node name. This generic value,
containing pattern-matching characters, evaluates
to a list of zero or more remote node names.
list—Specifies a list of remote node specifications.
Enclose the list in parentheses, and separate each
value with a comma.
srcfile Selects statistics based on
a source file name. This
parameter can be
abbreviated as srcf.
srcf=/path/file name
For example:
sel stat srcf=/sci/accounting/june.payroll;
This parameter can be used in combination with
the destfile parameter to select statistics based on
a source file name and a destination file name,
for example:
sel stat srcf=/sci/accounting/june.payroll
dest=/sci/payroll/june.payroll
startt Selects records produced
both at and since the
specified time. The date
or day and time are
positional. If you do not
specify date or day, a
comma must precede
time.
[date | day][,hh:mm:ss [am|pm]]
date—Specifies the day (dd), month (mm), and
year (yy), which you can code as mm/dd/yyyy
or mm-dd-yyyy. If you only specify date, the
time defaults to 00:00:00. The current date is the
default.
day—Specifies the day of the week. Values are
today, monday, tuesday, wednesday, thursday,
friday, saturday, and sunday.
hh:mm:ss [am | pm]—Specifies the time of day
in hours (hh), minutes (mm), and seconds (ss).
You can specify the hour in either 12- or 24-hour
format. If you use 12-hour format, then you must
specify am or pm. The default is the 24-hour
format. The default value is 00:00:00, which
indicates midnight. If you specify only the day
value, the time defaults to 00:00:00.
Chapter 1. Controlling and Monitoring Processes 31