IBM 6E1 Server User Manual


 
Chapter 1. General description 7
1.3.6 Cable management arm
The Model 6C1 is shipped by default with a cable management arm. You can route all cables
through the cable management arm, attaching the cables to the arm with the hook and loop
fastener strips provided. The wraps are provided for additional cable management.
Figure 1-3 shows the cable management arm. As the drawer is moved on its rails into the
service position, the arms expand or collapse, actively managing the cables. A cable retention
clip located on the rear of the server provides a reliable anchor for the cable so that the
drawer movement does not accidentally detach them.
Figure 1-3 Cable management arm for Model 6C1