IBM 72H9623 Computer Monitor User Manual


 
i
DANGER
To avoid electric shock hazard:
The product is supplied with a grounded plug and power cord which should be used to
connect to the AC supply.
The power cord should only be used with a properly wired and grounded power outlet.
Any equipment to which this product is attached must also be connected to a properly wired
and grounded outlet.
Do not remove the covers.
The product does not incorporate an AC power switch. To isolate the monitor from the
electrical supply, you must remove the plug from the power outlet. The power outlet should
be easily accessible.
Do not connect or disconnect this product during an electrical storm.
Always use the AC adapter supplied with the monitor.
Handing:
Handle this product with care when moving it.
The panel should not be operated in a horizontal position.
The fluorescent lamp used in the Liquid Crystal Display assembly contains a small quantity
of mercury (less than 50 milligrams). For environmental reasons this product should not be
disposed of into landfill. It must be disposed of as required by local ordinances or
regulations.
The Liquid Crystal Display assembly is made of glass and can break as a result of rough
handling or dropping. This may lead under some circumstances to a small quantity of the
liquid crystal material being exposed. Avoid contact with this material as it is an irritant.
Should this material come into contact with eyes, hands, etc., the area should be washed
with water for at least 15 minutes; medical care should be obtained if any symptoms are
present after washing.
DANGER
Pour éviter tout risque d’électrocution :
Le produit est livré avec un cordon d’alimentation et une prise de terre à utiliser pour le
branchement sur le secteur (VCA).
Le cordon d’alimentation ne doit être branché que sur une prise électrique correctement
câblée et mise à la terre.
Tous les matériels auxquels ce produit est raccordé doivent également être branchés sur
une prise électrique correctement câblée et mise à la terre.
Ne pas enlever les capots de protection.
Le produit ne possède aucun interrupteur de courant électrique (VCA). Pour isoler le
moniteur de l’alimentation électrique, débrancher la fiche de la prise électrique. La prise
électrique doit être facilement accessible.
Ne pas brancher ou débrancher ce produit pendant un orage électrique.
• Toujours utiliser l’adaptateur électrique (VCA) fourni avec le moniteur.