Filter
Top Products
12. Install the new system board assembly into the computer chassis by aligning
the four slots in the metal plate on the bottom of the system board with the
tabs in the chassis.
Important
Make sure to correctly align the metal plate on the bottom of the system
board with the tabs in the chassis. Otherwise, the system board might be
damaged when you install the screws.
13. Align the seven screw holes, and install the screws.
14. Reinstall all adapter cards. See “Replacing a PCI adapter” on page 20.
15. Route the fan cable through the notch on the side of the air baffle. Then,
reinstall the air baffle by aligning the tabs with the holes in the chassis, and
press the air baffle down until it is secure.
16. Reconnect all cables that were disconnected from the system board. Make sure
all cables are routed correctly. See “Identifying parts on the system board” on
page 4 for cable locations.
17. Go to “Completing the parts replacement” on page 31.
12 Hardware Replacement Guide