Filter
Top Products
Replacing a memory module
Attention:
Do not open your computer or attempt any repair before reading the “Important safety
information” in the Quick Reference that was included with your computer or in the
Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Quick
Reference or HMM, go to http://www.ibm.com/pc/support/.
1. Remove the computer cover. See “Removing the cover” on page 5.
2. Locate the memory connectors. See “Locating components” on page 1.
3. Open the retaining clips, and lift the memory module out of its connector.
4. Ensure that the notch on the new memory module 1aligns correctly with the
connector key 2 on the system board. Push the memory module straight
down into the connector until the retaining clips close.
5. Go to “Completing the parts replacement” on page 31.
Chapter 2. Replacing hardware 19