Filter
Top Products
Replacing a PCI adapter
Attention:
Do not open your computer or attempt any repair before reading the “Important safety
information” in the Quick Reference that was included with your computer or in the
Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Quick
Reference or HMM, go to http://www.ibm.com/pc/support/.
1. Remove the computer cover. See “Removing the cover” on page 5.
2. Push the blue adapter latch as indicated and pivot it to the open position.
3. Remove the adapter by pulling it straight out of the adapter connector.
4. Install the new adapter into the same adapter connector. Ensure the adapter is
fully seated into the adapter connector.
20 Hardware Replacement Guide