Filter
Top Products
3
ENGLISH
Setup
Hardware Requirements
This Monitor requires a computer with a suitable on-board sub-system or Video Adapter card that can
support SXGA 1280 x 1024 at 75 Hz.
Workplace Preparation
Positioning the Monitor
This section gives advice
on what you should
consider before you set up your
monitor.
Choose a suitable place to position the monitor where it is not near
fluorescent desk lighting. Ensure that the furniture or equipment can support
the weight of the monitor. Allow at least 2 inches (50mm) ventilation space
around the monitor.
Height
The monitor should be positioned so that the top of the screen is slightly
below your eye level when you sit at your workstation.
Orientation
Choose a position that gives the least reflection from lights and windows,
usually at a right angle to any windows. The monitor should be positioned
directly in front of you so that you do not have to twist your body to use it. Tilt
the monitor to a comfortable viewing angle.
Lifting the Monitor
Hold the bottom of the screen with both hands in the positions shown.
Do not support the
monitor within the
screen area. The Liquid
Crystal Display is glass and
can be damaged by rough
handling or excessive
pressure.
txteng.book Page 3 Friday, April 3, 1998 3:28 PM