Filter
Top Products
27
ENGLISH
9. Select AUTO SETUP and press the contrast button . “OFF”
automatically changes to “READY” and then to “COMPLETED,” and
setup ends automatically. The screen might be distorted during setup.
This is not a problem.
If “AUTO SETUP COMPLETED” is not displayed, or the “AUTO SETUP FAILED”
message appears, repeat the auto setup procedure several times. If auto setup
continues to fail, complete the
Manual Setup
on page 28.
10. Press the setup switch on the back of the monitor to exit the setup main
menu.
11. Press ‘q’ to end the color pattern.
12. Push the setup switch on the back of the monitor to turn off the setup
main menu.
13. Enter the following if you no longer need the files in the hard disk :
• rm xbar.xwd
• rm xcolorbar
You have completed the monitor setup.
If the screen flickers, repeat
the setup several times until
the flicker is minimised, or adjust
it manually by following Manual
Setup on page 28.
txteng.book Page 27 Friday, April 3, 1998 3:28 PM