Filter
Top Products
Problem: When you are using the port replicator, resuming normal operation
from hibernation or standby mode takes a long time.
Solution: If the Ethernet port is enabled, but the port replicator is not
connected to a LAN, resuming operation can take a long time. The computer
queries the Ethernet until the timeout timer stops the query. If you want to
access an Ethernet, connect the network cable. If you are not using the
network, disable the Ethernet port as follows:
For Windows 98:
1. In the Control Panel, double-click the System icon.
2. Click the Device Manager tab.
3. Double-click Network Adapter.
4. Double-click Intel EtherExpress PRO PCI Adapter.
5. Select the Disable in this hardware profile check box.
6. Click OK.
7. Close all windows.
8. Restart the computer.
For Windows NT
®
:
1. In the Control Panel, double-click the System icon.
2. Select Intel EtherExpress PRO Adapter, and click Startup...
3. Select Disabled.
4. Click OK.
5. Click Close.
6. Close all windows.
7. Restart the computer by powering it off and on again.
Solving computer problems
Chapter 2. Solving computer problems 21