Filter
Top Products
Step 5. Stopping the Diagnostics
1. If you are running Online diagnostics, shut down the system, using the following
procedure:
a. Press the 3 key repeatedly until you get to the Diagnostic Operating
Instructions, then follow the displayed instructions.
b. Press the 3 key once, and then follow the displayed instructions to shut down
the system.
2. If you changed any attributes on your ASCII terminal to run the diagnostics,
change the settings back to normal.
3. This completes the system verification. Report the SRN if you received one to
the service organization. To do a normal boot, turn off the system unit and wait
30 seconds, and then turn the system power on.
7-4 7046 Model B50 User's Guide