Filter
Top Products
Exchange 2003 VSS Backup Solution
For IBM Storage DS8000/DS6000
And Symantec Backup Exec 11d
Page 27 David West, David Hartman
©
Copyright IBM Corp. 2007
4. Verify that the CIMOM is active by finding CIM Object Manager - DS
Open API in the Name column of the Services window. For this
component, if the Status column is not marked Started, right click on
CIM Object Manager - DS Open API and click Start from the pop-up
menu. Wait for the Status to change to Started.
5. Verify CIMOM registration with SLP by selecting Start Æ Programs
Æ CIM agent for IBM DS Open API Æ Check CIMOM Registration.
The window closes when you press any key, as instructed in the
output:
service: wbem:http://tpc035/ 5989, 65535
press any key to continue...
Note: If the verification of the CIMOM registration is not successful,
stop and restart the SLP and CIMOM services.
6. Use the verifyconfig command to locate all WBEM services in the
local network. This command verifies that you have configured the
CIM agent and can connect to at least one ESS. Type the
verifyconfig command in a command prompt window in the directory
where the CIM agent was installed; for example:
c:\program files\ibm\cimagent>verifyconfig -u <username> -p
<password>
where username is the user name and password is the password for
the user name that you configured to manage the CIMOM.
If the command is successful, output similar to the following is
displayed:
C:\program files\ibm\cimagent>verifyconfig -u guest -p
guest
Verifying configuration of CIM agent for the IBM
TotalStorage DS Open Application Programming Interface...
Communicating with SLP to find WBEM services...
3 WBEM services found
host=9.11.111.111, port=5989
host=9.11.111.112, port=5989
host=9.11.111.113, port=5989
Connecting to CIM agent, host=9.11.111.112, port=5989
Found 2 IBMTSESS_StorageSystem instances: