Filter
Top Products
MS-7236 Mainboard
3-22
USB Device WakeUp From S3
This setting allows USB device wake up the system from S3 state. Settings
are: [Enable], [Disabled].
Resume By PS/2 Keyboard
The setting determines whether the system will be awakened from what power
saving modes when input signal of the PS/2 keyboard is detected.
Specific Key for PowerOn
This item is available when Resume By PS/2 Keyboard is enabled. This con-
trols how and whether the keyboard is able to power on the system. Press
[Enter], and then you must press a key for power on the system.
Resume By PS/2 Mouse
The setting determines whether the system will be awakened from what power
saving modes when input signal of the PS/2 mouse is detected.
Resume On PME#
When setting to [Enabled], this setting allows your system to be awakened
from the power saving modes through any event on PME (Power Management
Event). Setting options: [Disabled], [Enabled].
Resume By PCIE Device
When setting to [Enabled], this setting allows your system to be awakened
from the power saving modes through any event on PME (Power Management
Event).
Resume On RTC Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the S3, S4, and S5 state. Setting options: [Disabled],
[Enabled]. Select [Enabled] to adjust the date & time for RTC Alarm.