Filter
Top Products
RACROUTE REQUEST=EXTRACT,TYPE=EXTRACT or TYPE=REPLACE
before installing OS/390 Release 2 Security Server (RACF). In addition to this
book you should read:
–
OS/390 Security Server (RACF) Planning: Installation and Migration
for
OS/390 Release 1,
–
RACF Planning: Installation and Migration
for RACF 2.1, and
–
RACF Migration and Planning
for RACF 1.9.2.
From RACF releases prior to 1.9
If you are on a RACF release prior to 1.9, you must install RACF 1.9,
restructure your database, and perform appropriate testing of any
installation-supplied code that uses ICHEINTY or RACROUTE
REQUEST=EXTRACT,TYPE=EXTRACT or TYPE=REPLACE. (Note, however,
that RACF 1.9 is no longer available. If you do not already have RACF 1.9,
contact your IBM representative for assistance.) Then, if you meet the OS/390
release requirements and the other software requirements, you can install
OS/390 Release 2 Security Server (RACF). In addition to this book you should
read:
–
OS/390 Security Server (RACF) Planning: Installation and Migration
for
OS/390 Release 1,
–
RACF Planning: Installation and Migration
for RACF 2.1,
–
RACF Migration and Planning
for RACF 1.9.2, and
–
RACF Migration and Planning
for RACF 1.9.
Hardware Requirements
OS/390 Release 2 Security Server (RACF) does not require any specific hardware
support. It runs on all hardware supported by OS/390 Release 2. However, data
sharing mode in the Parallel Sysplex requires a coupling facility configured for
RACF's use.
For systems in a multisystem RRSF node, we recommend placing:
All workspace data sets on shared DASD and in a shared catalog
All RRSFLIST data sets on shared DASD
One RACF parameter library on shared DASD to be used by all systems
RACF cannot ensure that the systems in a multisystem RRSF node share a RACF
database. The system programmer must ensure that the RACF database for a
multisystem RRSF node is on shared DASD and shared by the systems in the
multisystem node.
Software Requirements
Figure 19 summarizes the software requirements for the new function provided by
OS/390 Release 2 Security Server (RACF). For an overview of the function,
including the PTFs that provide the function, see Chapter 2, “Release Overview” on
page 5.
24 OS/390 V1R2.0 Security Server (RACF) Planning: Installation and Migration