Filter
Top Products
//ᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍ//
//ᑍ ᑍ//
//ᑍ RRSFALTR: ᑍ//
//ᑍ ᑍ//
//ᑍ IDCAMS JOB to rename the workspace data sets when installing ᑍ//
//ᑍ PTF UW9235 (multisystem node support) ᑍ//
//ᑍ ᑍ//
//ᑍ NOTE NOTE NOTE NOTE ᑍ//
//ᑍ Please note that this job should only be run when the ᑍ//
//ᑍ RACF subsystem address space has been taken down using the ᑍ//
//ᑍ procedure that is documented in the RACF publications. ᑍ//
//ᑍ NOTE NOTE NOTE NOTE ᑍ//
//ᑍ ᑍ//
//ᑍ Modify the JOB statement to fit your installation's ᑍ//
//ᑍ requirements before executing it. ᑍ//
//ᑍ ᑍ//
//ᑍ You will need to change the following: ᑍ//
//ᑍ ᑍ//
//ᑍ prefix - To the PREFIX name you specified ᑍ//
//ᑍ on the TARGET command for this node. ᑍ//
//ᑍ ᑍ//
//ᑍ nodename - Is the name given to the RRSF node via ᑍ//
//ᑍ the TARGET command that defined it. ᑍ//
//ᑍ ᑍ//
//ᑍ sysname - Is the CVTSNAME of the local system. ᑍ//
//ᑍ ᑍ//
//ᑍ local-node - Is the nodename associated with the ᑍ//
//ᑍ local node. ᑍ//
//ᑍ ᑍ//
//ᑍ remote-node - Is the nodename associated with the ᑍ//
//ᑍ remote node. ᑍ//
//ᑍ ᑍ//
//ᑍ local-lu - Is the LU name associated with the ᑍ//
//ᑍ local node or system. ᑍ//
//ᑍ ᑍ//
//ᑍ remote-lu - Is the LU name associated with the ᑍ//
//ᑍ remote node or system. ᑍ//
//ᑍ ᑍ//
//ᑍ ᑍ//
//ᑍ NOTE: THE REMAINING KEYWORDS SHOULD NOT BE ALTERED. ᑍ//
//ᑍ ᑍ//
//ᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍ//
Figure 20 (Part 1 of 2). JCL to Rename the Workspace Data Sets
30 OS/390 V1R2.0 Security Server (RACF) Planning: Installation and Migration