IBM HL-5240L Printer User Manual


 
5. Options
57
DIMM
For HL-5240/HL-5240L
The HL-5240/HL-5240L printer has 16 MB of standard memory and one slot for optional memory expansion.
You can expand the memory up to 528 MB by installing dual in-line memory modules (DIMMs).
For HL-5250DN
The HL-5250DN printer has 32 MB of standard memory and one slot for optional memory expansion. You
can expand the memory up to 544 MB by installing dual in-line memory modules (DIMMs).
DIMM types
You can install the following DIMMs:
128 MB Buffalo Technology VN133-D128 / VN133-X128
256 MB Buffalo Technology VN133-D256
512 MB Buffalo Technology VN133-D512
64 MB TechWorks 12165-0004
128 MB TechWorks 12462-0001
256 MB TechWorks 12485-0001
512 MB TechWorks 12475-0001
Note
For more information, visit the Buffalo Techonology site at http://www.buffalotech.com
.
For more information, visit the Techworks web site at http://www.techworks.com
.
In general, the DIMM must have the following specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or 512 MB
Height: 31.75 mm (1.25 in.)
Dram Type: SDRAM 2 Bank
SDRAM can be used.
Note
There might be some DIMMs that will not work with the printer.
For more information, call the dealer you bought the printer from or Brother Customer Service.