Filter
Top Products
1-1
1. Printer Settings (15 ppm copier)
Use the numeric keys to enter the desired menu number and then press the Enter
key.
Use the “▲” and “▼” keys to scroll through the menu numbers one number at a time.
(Any menu number that does not have a corresponding setting item will be skipped
and the next viable menu number that DOES have an available setting will be
displayed.)
Select the desired setting.
Note
Settings are normally changed by using the “▲” and “▼” keys to select a value (or the
number that corresponds to the desired setting) and then pressing the Enter key.
When it is necessary to type in a value or number directly (such as with a network
address or the time, etc.), use the numeric keys to enter the desired information and
then press the Enter key. (When you enter a network address it necessary to press
the Enter key after each block of 3 digits.)
Press the Printer key again to switch back to the copier mode.
1. Printer Settings (15 ppm copier)
IMPORTANT!
All setting items and the selection of their actual settings are accomplished in this machine based on a maximum 3-digit entry system. Refer
to “1-2 List of settings” on page 1-3 for information regarding the various items as well as their corresponding menu numbers and available
settings.
1
1-1 Procedure for making settings
2
4
3
Press the Printer key. The machine will switch to the printer mode and “P00” will
appear in the copy quality/magnification display.