Filter
Top Products
26 SBC-658 User Manual
LCD display connector (CN2)
CN2 is a 50-pin, dual-in-line header used for flat panel displays.
When the SBC-658's power is applied, the control signal is low until
just after the relevant flat panel signals are present.
Configuration of the VGA interface is done completely via the
software utility. You do not have to set any jumpers.
LCD display connector (CN2)
Pin Signal Pin Signal
1 +12 V
DC
2 +12 V
DC
3 GND 4 GND
5 LCD Vcc 6 LCD Vcc
7 ENAVEE 8 GND
9P0 10 P1
11 P2 12 P3
13 P4 14 P5
15 P6 16 P7
17 P8 18 P9
19 P10 20 P11
21 P12 22 P13
23 P14 24 P15
25 P16 26 P17
27 P18 28 P19
29 P20 30 P21
31 P22 32 P23
33 P24 34 P25
35 SHF CLK 36 FLM (V SYS)
37 M 38 LP (H SYS)
39 GND 40 ENABKL
41 P26 42 P27
43 P28 44 P29
45 P30 46 P31
47 P32 48 P33
49 P34 50 P35