Filter
Top Products
ZZ17-W2001-B
11
Optional Intrusion Switch
The chassis could be built with
intrusion switch, assembly in left side
of chassis, when side cover removed
the system will alarm for intrusion, if
connected.
3.7. Instructions for cooling fan assembly
The chassis could be mounted optional two 60x60 cooling fans in
rear mounted for strengthen the air flow by pass of Add-on Cards.
3.8 Rack Mount Sliding Rails Installation
YY-W2 needs to use 24” rails (optional).
Screw the rails to both sides of the chassis by two M4 screws. Then
fix the main rails to the Rack Mount Cabinet and put the server
chassis unit into Rack Mount Cabinet. The drive bays of YY-W2
could be rotated as horizontal for keeping CDROM well in
rackmount use.