Filter
Top Products
ZZ17-W2001-B
6
3. System Installation
3.1 Chassis Open
To release two (2) screws on
the rear side of chassis, pull
the side cover with handle.
3.2 Motherboard Installation
Check mounting holes of
motherboard, to screw the
standoffs required to chassis.
Put the Motherboard into the
chassis, than screw in for
fixing.
Next step is to plug the DC
ATX-20(or EPS-24) pin
connector on the Power Supply to Motherboard and insert the power
switch connector properly.
Finally, plug the IDE cable connector to IDE interface connector on
the motherboard. In order to reduce the interference of cooling fans’
airflow, please adjust all cables to proper positions.